Javascript required
Skip to content Skip to sidebar Skip to footer
Home / How to Install a Samsung Fridge Water Filter

How to Install a Samsung Fridge Water Filter

Replace the water filter in your Samsung refrigerator

Samsung refrigerator and water filter replacement

You need a clean water filter to get fresh, filtered water. We recommend that you replace the water filter every six months. The refrigerator's water filter light will let you know when those six months are up and should be reset after changing the filter.

Note: Only use Samsung Genuine Filters that are designed to work with your Samsung refrigerator. You can purchase them directly on our website. Do not use third-party water filters, which may leak and damage the refrigerator.

There are three types of Samsung water filters, so you'll want to make sure you're choosing the correct one for your fridge. Replacement filters can be purchased on our accessories page.

First, locate the filter in your fridge model. The location will vary depending on your model, so please check your user manual if you're unsure. Then, check the model number on the filter itself. This will let you know which of the following filter types you'll need to purchase.

HAF-CIN

Water filter model HAF-CIN

HAF-QIN

Water filter model HAF-QIN

HAFCU1

Water filter model HAFCU1

Replacing your water filter is simple and should only take a few minutes. If you're unsure about whether you need to replace the filter, check the indicator light on your fridge. For instance, when the filter is new, the light may be blue, yellow, or green, depending on your fridge model.

When it's almost time to change the filter, the light will be purple. After 6 months, the light will turn red. At this time, you should change the filter right away.

HAF-CIN and HAF-QIN filter types:

  1. First, turn off the water supply and then locate the filter. If you are unsure where it is, please consult your user manual.

  2. Open the water filter cover and then rotate the old filter counterclockwise to unlock it.

  3. Then, pull it straight out to remove it from the filter housing.

  4. To insert the new filter, first remove the protection cap from the top of the filter. Then, push it straight into the filter housing and turn it clockwise.

  5. Make sure the lock symbol matches up with the indicator line.

HAFCU1 filter types:

  1. First, turn off the water supply and then locate the filter. If you are unsure where it is, please consult your user manual.

  2. To remove the old filter, twist it to the left. This will unlock it.

    Removing old filter with left arrow showing the direction

  3. Then, pull it down to remove it from the filter housing.

  4. To insert the new filter, push it up into the filter housing and then turn it to the right.

  5. Make sure the notch at the top of the filter is matched up with the arrow on the filter housing.

    Matching notch at the top of the filter with the arrow

    6. After replacing your filter, dispense a few gallons of water to flush out any impurities or air. Then, make sure to reset the water filter light on your fridge. Please see the next sections for more information.

The water filter light on your fridge operates on a timer and will turn on after 6 months. For models where the indicator is always lit, it will turn red after 6 months.

Depending on the quality of the water in your area and the amount of water you dispense, you may want to change the filter more or less frequently than the light suggests. To determine if a new filter is needed, dispense water first with the filter installed and then with the filter removed. If the speed the water dispenses at is significantly different, you should replace the filter whether the indicator is lit or not.

You can use the following steps to reset the filter light:

  1. Find the Filter Reset button on the control panel, if it's available. It is sometimes the secondary function of another button on the panel.

  2. Once located, touch and hold the correct button for 3 seconds until the light resets.

  3. The filter icon will either turn off or change back to its normal color when it's reset. This starts the 6 month timer over again.

Samsung Fridge with filter light on

Note: Some models may require two buttons to be touched simultaneously to reset the light. Touch screen models will use on-screen menus instead. For instructions specific to your refrigerator, see your user manual.

The water filter light and timer can be reset on your Family Hub fridge with the following steps.

  1. From the Home screen, tap Apps, and then tap Fridge Manager.

  3. Tap Water Filter, then tap Reset, and then tap Proceed. This will reset the filter light and timer.

  4. After tapping the water filter icon, you can tap Buy Filter to purchase a Samsung water filter if needed.

The water filter icon on the Family Hub screen

You can also reset the filter light on models RF4289 and RSG309.

  1. Navigate to and select the Settings icon at the bottom of the display, and then tap Water Filter.

  2. When the Water Filter menu opens, tap Next in the bottom right corner three times until you reach page 4/4 of the Water Filter menu.

  3. Touch and hold Reset the water filter in the middle of the display until the status of the filter changes.

  4. After "Filter Replaced" appears and goes away, tap Save in the bottom right corner of the display.

Reset the water filter option on model RF4289

The National Sanitation Foundation (NSF) and the American National Standards Institute (ANSI) have various standards to identify what is filtered by a water filter. Samsung's water filters are Carbon Filters rated for the NSF/ANSI 42, NSF/ANSI 53, and NSF/ANSI 401 standards.

NSF/ANSI 42

  • Filtered to reduce aesthetic impurities such as chlorine and taste/odor.

NSF/ANSI 53

  • Certified to reduce a contaminant with a health effect. Health effects are set in this standard as regulated by the U.S. Environmental Protection Agency (EPA) and Health Canada.

  • Asbestos, Atrazine, Benzene, 2, 4-D, Carbofuran, Chlorbenzene, Cyst (99.99%), Endrin, Ethylbenzene, Lead, Lindane, Mercury, O-Dichlorobenzene, P-Dichlorobenzene, Tetrachloroethylene, Toxaphene, Turbidity

NSF/ANSI 401

  • Verified to reduce one or more of 15 emerging contaminants from drinking water. These emerging contaminants can be pharmaceuticals or chemicals not yet regulated by the EPA or Health Canada.

  • Atenolol, Bisphenol A, Carbamazepine, DEET, Estrone, Linuron, Nonylphenol, Phenytoin, Trimethoprim

If you are having trouble placing the water filter in your refrigerator, please check out our troubleshooting guide for assistance.

Thank you for your feedback!

home-appliances|refrigerators

© 2021 Samsung Electronics America, Inc. Samsung, Samsung Galaxy and Family Hub are trademarks of Samsung Electronics Co., Ltd. All other brands, products and services, and their respective trademarks, names and logos, are the property of their respective owners. The above content is provided for entertainment and information purposes only. Consult user manual for more complete information. All information included herein is subject to change without notice. Samsung is not responsible for any direct or indirect damages, arising from or related to use or reliance of the content herein.

How to Install a Samsung Fridge Water Filter

Source: https://www.samsung.com/us/support/answer/ANS00060149/